Welcome to Taikyu. Your Spoon Sports Distributor

CRZ ZF1

  • CRZ_890
    CRZ - ZF1

Set Descending Direction

13-24 of 54

  • HEAD COVER [RED]

    Product Overview

    Unlike Spoon’s signature Yellow Head Cover the Spoon Red Head Cover is finished in a crinkle finish red as found on the CR-Z’s, Type R predecessors for that high performance aftermarket look in your engine bay.

    HEAD COVER [RED]

    12310-GE8-R00-C
    Excl. Tax: €245.83 Incl. Tax: €295.00

  • HEAD COVER [YELLOW]

    Product Overview

    The Spoon yellow Intake Chamber is painted is finished in a smooth Spoon Yellow to match that of Spoon’s race cars. For that high performance aftermarket look in your engine bay.

    HEAD COVER [YELLOW]

    12310-GE8-Y00-C
    Excl. Tax: €245.83 Incl. Tax: €295.00

  • HIGH CAMSHAFT KIT

    Product Overview

    Spoon Performance Camshaft kit for CRZ ZF1

    The CRZ  Vtec system works in a slightly different way compared to the conventional system that most Honda Enthusiasts are used to. The CRZ utilises a camshaft with a single lobe that engages two inlet valves per cylinder when Vtec is engaged at higher RPMS. At low RPM the camshaft only operates one valve to give better economy and allow for the electric motor to assist.

    The Spoon camshaft kit utilises parts from the GE8 Honda Jazz that permanently engage both valves giving vast improvement in torque and power in the lower RPM’s. Additional the re-profiled camshaft with higher lift and duration lobes give a marked improvement in power and torque through the higher RPM’s

    HIGH CAMSHAFT KIT

    14000-ZF1-G00-C
    Excl. Tax: €1,275.00 Incl. Tax: €1,530.00

  • HIGH FLOW AIR FILTER

    Product Overview

    New version features a multilayer urethane material instead of the OEM high density paper material. The use of urethane dramatically improves filter efficiency. This filter cannot be washed and re-used. Replace with normal recommended factory intervals.

    Upon full opening of the throttle, a huge volume of air is drawn in at highspeeds. Meanwhile, when the throttle is closed, an inertial force acts and air is compressed at the instant just prior to full closing. When the accelerator is subsequently depressed, the sealed cleaner box is subjected to a more intense vacuum as a result of the reaction to compression. The efficiency of replenishment is increased a result of this action, and accordingly, the air-intake system of the Honda NA is both extremely ingenious and highly necessary.

    HIGH FLOW AIR FILTER

    17220-ZF1-000-A
    Excl. Tax: €62.50 Incl. Tax: €75.00

  • INTAKE CHAMBER [RED]

    Product Overview

    The Spoon Red GE8 Intake Manifold is finished in a crinkle finish red as found on the CR-Z, Jazz / Fit’s, Type R predecessors for that high performance aftermarket look in your engine bay. 

    INTAKE CHAMBER [RED]

    17110-ZF1-R00-A
    Excl. Tax: €375.00 Incl. Tax: €450.00

  • INTAKE CHAMBER [RED]

    Product Overview

    The Spoon Red GE8 Intake Manifold is finished in a crinkle finish red as found on the CR-Z, Jazz / Fit’s, Type R predecessors for that high performance aftermarket look in your engine bay. 

    As a performance upgrade this inlet manifold from the GE8 can then be installed to the CR-Z. The larger plenum helps the engine with breathing. Gains of 6 hp and 5ft lb of torque can be achieved. Works very well with the Spoon venture throttle body.

    INTAKE CHAMBER [RED]

    17110-GE8-R00-A
    Excl. Tax: €375.00 Incl. Tax: €450.00

  • INTAKE CHAMBER [YELLOW]

    Product Overview

    The Spoon Sports replacement air filter is constructed from multilayer urethane material instead of the OEM high density paper material. The use of urethane dramatically improves filter efficiency. This filter cannot be washed and re-used. Replace with normal recommended factory intervals.


    Upon full opening of the throttle, a huge volume of air is drawn in at high speeds. Meanwhile, when the throttle is closed, an inertial force acts and air is compressed at the instant just prior to full closing. When the accelerator is subsequently depressed, the sealed cleaner box is subjected to a more intense vacuum as a result of the reaction to compression. The efficiency of replenishment is increased a result of this action, and accordingly, the air-intake system of the Honda NA is both extremely ingenious and highly necessary.

    INTAKE CHAMBER [YELLOW]

    17110-ZF1-Y00-A
    Excl. Tax: €375.00 Incl. Tax: €450.00

  • INTAKE CHAMBER [YELLOW]

    Product Overview

    The Spoon Yellow Intake Chamber is finished in a high gloss smooth yellow as found on Spoon’s signature yellow head covers. For that high performance aftermarket look in your engine bay.

    As a performance upgrade this inlet manifold from the GE8 can then be installed to the CR-Z. The larger plenum helps the engine with breathing. Gains of 6 hp and 5ft lb of torque can be achieved. Works very well with the Spoon venture throttle body.

    INTAKE CHAMBER [YELLOW]

    17110-GE8-Y00-A
    Excl. Tax: €375.00 Incl. Tax: €450.00

  • LIGHTWEIGHT CARBON BONNET

    Product Overview

    Spoon carbon fiber bonnets are hand-laid. The result is excellent quality and strength whilst weighing very little. Weight reduction can be up to half the weight of the stock item. By reducing the front weight of the car, under steer is greatly reduced and the cars handling is improved.

     

    Bonnet pins are not required due to their sturdy construction and moulded bonnet catch. 

    LIGHTWEIGHT CARBON BONNET

    60100-ZF1-000-C
    Excl. Tax: €1,050.00 Incl. Tax: €1,260.00

  • LIGHTWEIGHT WHEEL NUT, BLUE

    Product Overview

    Spoon Sports Lug Nuts are aluminium construction and Anodized Blue or Red. Ultra Lightweight and with a 60 Degree Taper.

     

    Notice:

    TAPERED lug nuts designed for use with aftermarket wheels. They are not to be used on OEM wheels. Please check which lug nut type your wheels use before installing.

    Weight: 21.13g each

    Thread: M12x1.5

    LIGHTWEIGHT WHEEL NUT, BLUE

    ALL-90304-000-A
    Excl. Tax: €6.67 Incl. Tax: €8.00

  • LIGHTWEIGHT WHEEL NUT, RED

    Product Overview

    Spoon Sports Lug Nuts are aluminium construction and Anodized Blue or Red. Ultra Lightweight and with a 60 Degree Taper.

     

    Notice:

    TAPERED lug nuts designed for use with aftermarket wheels. They are not to be used on OEM wheels. Please check which lug nut type your wheels use before installing.

    Weight: 21.13g each

    Thread: M12x1.5

    LIGHTWEIGHT WHEEL NUT, RED

    ALL-90304-001-A
    Excl. Tax: €6.67 Incl. Tax: €8.00

  • Limited Edition - Spoon Bobblehead

    Product Overview

    PREODER:

     

    Spoon Sports Japan Limited Edition 30th Anniversary Spoon Bobblehead in unquire cool packaging. A True Collectable ! Japan are making these is a very limited production run for the Tokyo Auto Salon but we have reserved some for out loyal EU customers.

     

    Place an order now so you are not dissapointed.

     

    Orders will ship mid-late February

    Limited Edition - Spoon Bobblehead

    ORG-90004-000-B
    Excl. Tax: €36.67 Incl. Tax: €44.00

Set Descending Direction

13-24 of 54

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Product Enquiry

<

Loading, please wait ... Loading, please wait ...