Welcome to Taikyu. Your Spoon Sports Distributor

S2000 AP1 / AP2

  • AP1_890
    S2000 - AP1 / AP2

Set Descending Direction

37-48 of 128

  • BUSH SET F.LOWER ARM

    Product Overview

    Spoon Up rated Bush Set F.Lower Arm[2pcs]

    BUSH SET F.LOWER ARM

    51353-AP1-000-D
    Excl. Tax: €83.33 Incl. Tax: €100.00

  • BUSH SET R CONTROL ARM

    Product Overview

    Spoon Up Rated Bush Set Rear Control Arm – Rear Bush [2pcs]

    BUSH SET R CONTROL ARM

    52366-AP1-000-D
    Excl. Tax: €83.33 Incl. Tax: €100.00

  • CARBON AIR DUCT

    Product Overview

    The Spoon carbon Kevlar air duct for S2000 routes fresh, cold air to the stock intake box by collecting air from the grill of the front bumper and directing it over the radiator and into the intake box.

    This prevents the intake from ingesting hot engine bay air and ensures the engine operates at peak efficiency with the best intake air temperature possible.

    Developed under street and endurance racing conditions, it was noted that before the air duct was installed, when the engine is exposed to hot conditions the engine power feels to be reduced. After installation the engine is allowed to breathe cold air from the front of the bumper.

    Installation can be achieved without any modification to the bonnet.

    CARBON AIR DUCT

    17228-AP1-000-A
    Excl. Tax: €404.17 Incl. Tax: €485.00

  • CARBON BUCKET SEAT

    Product Overview

    THIS HAS NOW BEEN REPLACED BY THE 2019 VERSION OF THE SPOON CARBON SEAT - https://www.uk.spoonsports.eu/all-81100-001.html 

    This Spoon Sports Carbon Fibre Seat is not only a beautiful lightweight seat ideal for racing and the road.

    Unique cloth material was used which exhibits good moisture wicking while preventing the body from sliding. The bucket shape allows driver to withstand greater later-G loading with less effort. Shell has spine cut-out for increased comfort. Weighs 5.7 kg.

    Fits all car models with most side mount rails. Carbon Kevlar construction.

    .

    CARBON BUCKET SEAT

    ALL-81100-000-D
    Excl. Tax: €1,175.00 Incl. Tax: €1,410.00

  • CARBON BUCKET SEAT 2019

    Product Overview

    This Spoon Sports Carbon Fibre Seat is not only a beautiful lightweight seat ideal for racing and the road.

    Unique cloth material was used which exhibits good moisture wicking while preventing the body from sliding. The bucket shape allows driver to withstand greater later-G loading with less effort. Shell has spine cut-out for increased comfort. 

    This seat uses low rebound flexible polyurethane foam and it  shape and fabric have changed compared to the last revision.

    There is a black spoon logo will embroidered and on a small tag on the side of the seat.

     

    Fits all car models with most side mount rails. Carbon Kevlar construction.

     5.7KG

    CARBON BUCKET SEAT 2019

    ALL-81100-001-D
    Excl. Tax: €1,258.33 Incl. Tax: €1,510.00

  • CENTER TRANSMISSION BRACE

    Product Overview

    The Spoon Center Brace Bar reinforces the tunnel floor by replacing the factory propeller shaft guard. 

     

    Older model cars may experience inconsistent fitment due to chassis flex with age. Slight chassis adjustment may be required for installation.

     

     Fits 2000-2005 S2000 model years. Does not fit 06+ models.

    CENTER TRANSMISSION BRACE

    40540-AP1-000-A
    Excl. Tax: €79.17 Incl. Tax: €95.00

  • Chromoly Steel Racing Wheel Nut [ea]

    Product Overview

    New for 2019.

    Spoon Sports Chromoly Steel Racing Wheel Nuts.

    Strong, Openended Design with Laser Etched Spoon Sports Logo.

    60 Degree Taper for Aftermarket wheel only.

     

    Notice:

    TAPERED lug nuts designed for use with aftermarket wheels. They are not to be used on OEM wheels. Please check which lug nut type your wheels use before installing.

    48mm Long

    Thread: M12x1.5

    Chromoly Steel Racing Wheel Nut [ea]

    ALL-90304-C12-A
    Excl. Tax: €8.33 Incl. Tax: €10.00

  • CLUTCH RELEASE BEARING

    Product Overview

    The Spoon release bearing has been designed for use in combination with the Spoon clutch cover and clutch disc for improve durability, lubrication and impact resistance.

    If you are upgrading the Spoon clutch ensure you match it with the Spoon release bearing for the best results.

    CLUTCH RELEASE BEARING

    22810-AP1-G00-B
    Excl. Tax: €166.67 Incl. Tax: €200.00

  • COMPLETE BLUEPRINTED ENGINE [2.0L]

    Product Overview

    For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.

    The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.

    During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them. 

    COMPLETE BLUEPRINTED ENGINE [2.0L]

    10000-F20-C00-D
    Excl. Tax: €11,762.50 Incl. Tax: €14,115.00

  • COMPLETE BLUEPRINTED ENGINE [2.2L]

    Product Overview

    For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.

    The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.

    During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them. 

    COMPLETE BLUEPRINTED ENGINE [2.2L]

    10000-F22-C00-D
    Excl. Tax: €11,762.50 Incl. Tax: €14,115.00

  • COMPLETE BLUEPRINTED ENGINE [2.2L]

    Product Overview

    For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.

    The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.

    During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them. 

    COMPLETE BLUEPRINTED ENGINE [2.2L]

    10000-F20-C01-D
    Excl. Tax: €11,762.50 Incl. Tax: €14,115.00

  • COUPE HARDTOP

    Product Overview

    Fits all S2000 model years. Carbon Fiber /FRP construction.

    Developed in part with Mooncraft corporation and years of endurance racing. The Spoon hardtop improves the aerodynamics of the vehicle for improved fuel mileage and aerodynamic efficiency. A Must have for any S2000 race car. 

    COUPE HARDTOP

    69000-AP1-000-D
    Excl. Tax: €3,229.17 Incl. Tax: €3,875.00

Set Descending Direction

37-48 of 128

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Product Enquiry

<

Loading, please wait ... Loading, please wait ...