Welcome to Taikyu. Your Spoon Sports Distributor

S660

Set Descending Direction

1-12 of 29

Page:
  1. 1
  2. 2
  3. 3
  • 000 - BLUE WIDE REAR VIEW MIRROR GLASS

    Product Overview

    Blue Wide Angle Rear View Mirror Glass inserts are a great upgrade to your interior without spending a lot of money. Instead of buying complete mirrors, these inserts go into your factory housing.

    The Spoon Hydro Blue Wide Mirror adopts a 14000R Curvature to give a wide field of vision without distortion. Glare is also reduced by the clever blue colour.

    Everything required for installation included in the box

    000 - BLUE WIDE REAR VIEW MIRROR GLASS

    76400-BRM-000-A
    Excl. Tax: €40.00 Incl. Tax: €48.00

  • LOW TEMP THERMOSTAT

    Product Overview

    The Spoon racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures resulting from modified applications.

    Once the engine is fully warmed up, the Spoon low-temperature racing thermostat will open at a lower temperature than standard thermostats. This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. 

    OEM - Starts opeing at 80°- Fully open at 90° 
    SPOON - Starts opeing at 68° - Fully open at 81°

    LOW TEMP THERMOSTAT

    19301-EG6-000-A
    Excl. Tax: €70.83 Incl. Tax: €85.00

  • RESOVIOR TANK COVER

    Product Overview

    Spoon reservoir tank cover serve three purposes. One, they help keep the reservoir tanks caps in place during racing and spirited driving, helping prevent spillage of vital fluids. Second, even if the caps are jarred open, the tank covers help contain the spill and minimize fluid loss. Third, the tank covers prevent dust and debris from accumulating on the tanks and potentially contaminating the brake fluid. Furthermore, they help prevent the brake fluid from adsorbing moisture from the atmosphere, which otherwise reduces braking performance and causes corrosion of brake components.

     

    Notice:

    Reservoir tank covers are sold in packs of 1.

    RESOVIOR TANK COVER

    ORG-90000-020-A
    Excl. Tax: €10.83 Incl. Tax: €13.00

  • S660 ADJUSTABLE COILOVER KIT

    Product Overview

    SPOON advocated "3S Suspension" is the 

    ○ riding comfortable even in town riding by making the starting area at the moment when the suspension sinks soft. 
    ○ Improve direct load transfer and straight running stability by eliminating sliding resistance and making it smooth in the intermediate area. 
    ○ In the vicinity of the bottom, it is tough and strong attenuation characteristics make it possible to achieve high durability even in extreme areas such as high G cornering and riding on curbstones. 

    However, in order to make use of this ideal suspension, it was necessary to first build an ideal body. 
    In the process of developing S660, we first developed rigid parts such as "STIFF PLATE series", "Rigid color", etc., we made the whole body rigid body and made the basis for full-scale development of the suspension. 
    This is the balanced total setting SPOON aims for. 

    In every stage including town riding, winding, circuit, etc., we designed and tested repeatedly in order to produce a safe, fun and fast damper kit at a high level, setting based on huge data, making an ideal car height adjustment kit Completed. 

    Both front and rear are equipped with a camber adjustment type Pilo upper mount, making it possible to adjust to the camber value according to the traveling stage, and it is also possible to cope with the tire fender line protrusion due to the big caliper installation. 
    We adopted Minebea (NMB) pillow ball which enables smooth and direct driving feel, realizing high durability. 

    We also secured enough rebound strokes and attached helper springs both front and rear to realize an ideal "spring feeling".
    A wide range of settings such as lowdown setting at the circuit and street use are possible.
    - -
    Remarks & special note
    Specifications: damping 32-stage adjustment, camber adjustment type pillow upper front and back, with the front and rear helper spring 
    <safety standards compatible> 

    [spring rate] Fr: 4kgf / mm (152mm ID65 ), Rr: 4kgf / mm (203mm ID65) 
    [helper] Fr: 0.47 kgf / mm Rr: 0.47 kgf / mm 
    [Car shipping height: Normal ratio] Fr: -15 mm Rr: -15 mm 
    [Shipping height at vehicle: Jack point] Fr: 130 mm Rr: 133 mm 
    [Shipping height at vehicle: Fender] Fr: 0 to - 35 mm Rr: 0 to - 35 mm [attenuation adjustment Fr: 587 mm Rr: 620 mm 
    [Shipping height at the time of shipment: Low beam height] 505 mm <Less than 500 mm is a safety standard nonconformity> 
    [Recommended vehicle height adjustment width: 
    Width】 32 steps (Hard 1st step ⇔ soft 32 steps) 
    【Factory Attenuation Dial Position】 Fr: 20 steps Rr: 20 steps 
    Factory Camber Value】 Fr: -1.0 ° Rr: -2.0 ° 
    【Camber Adjustable Width】 Fr: 0 to -3.0 ° Rr: 0 to -3.0 ° 
    Note) The height of the car is measured by our demo car. 

    Installation instructions 
    http://www.spoonsports.jp/blog/wp-content/uploads/2017/06/487930e715abaefc9bfd870137447e38.pdf

    S660 ADJUSTABLE COILOVER KIT

    51600-JW5-G20-D
    Excl. Tax: €2,720.83 Incl. Tax: €3,265.00

  • S660 AERO DIFFUSER CFRP (REAR)

    Product Overview

    SPOON has been carrying out tests on all stages, including suspension and rigid parts, to promote the high dynamic performance of S660 to a deeper area and pursuing further aerodynamics in circuits such as high-speed areas , And developed the aero diffuser for S660. 
    The shape is CFD analysis, it is simple, but the air resistance is reduced as much as possible, and downforce can be obtained by controlling the air flow on the bottom of the car body. It also contributes to improving fuel economy by reducing air resistance.
    - -
    Remarks & special note
    It is non-machining bolt on because the installation is only fastening the stay to the sub frame bolt. 
    (It can be installed even with a genuine muffler.) 
    * When interfering with the diffuser with SPOON N1 muffler kit, muffler equipped vehicle other than genuine, insert the 3 mm spacer included between the stay and the diffuser and adjust it. 

    Installation instructions 
    https://www.spoonsports.jp/blog/wp-content/uploads/2018/11/1374adf31caa0e25998beabd2acaf2b8.pdf

    S660 AERO DIFFUSER CFRP (REAR)

    71502-JW5-000-D
    Excl. Tax: €504.17 Incl. Tax: €605.00

  • S660 BLUE WIDE SIDE MIRROR GLASS

    Product Overview

    Spoon Sports Blue Wide Mirror inserts are a great upgrade to your exterior without spending a lot of money. Instead of buying complete mirrors, these inserts go into your factory housing.

    Spoon side mirrors are convex and anti-glare. The 900R Curvature allows for a wider viewing angle. Anti-glare blue tint reduces glare from bright lights.

    New feature of the mirrors are a blue Spoon Sports logo on the driver's side glass and yellow's Spoon Sports logo on the passenger side glass.

    Installation is easy as the mirror glasses come with instructions and all the equipment needed.

    S660 BLUE WIDE SIDE MIRROR GLASS

    76203-JW5-030-A
    Excl. Tax: €93.33 Incl. Tax: €112.00

  • S660 BLUPRINTED DRIVE SHAFT SET

    Product Overview

    The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure.

     

    The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances.

     

    This ensures a smooth power delivery and reliable service 

    S660 BLUPRINTED DRIVE SHAFT SET

    42300-JW5-C00-D
    Excl. Tax: €1,883.33 Incl. Tax: €2,260.00

  • S660 BRAIDED BRAKE HOSE SET

    Product Overview

    Spoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering of stainless-steel mesh. When installed it is possible to achieve increased braking feel and response. .

    S660 BRAIDED BRAKE HOSE SET

    01460-JW5-000-C
    Excl. Tax: €329.17 Incl. Tax: €395.00

  • S660 BRAIDED CLUTCH SLAVE HOSE

    Product Overview

    The spoon Clutch Slave Hose is a replacement for the stock rubber hose. It will create a more responsive pedal feel that can be maintained under high load and intensive use.

    The line is constructed from high quality stainless steel braded hose with a Teflon coating. Great upgrade for anyone looking for a more responsive clutch feel. 

    S660 BRAIDED CLUTCH SLAVE HOSE

    46961-JW5-000-A
    Excl. Tax: €93.33 Incl. Tax: €112.00

  • S660 BRAKE PADS [FRONT] MONOBLOCK

    Product Overview

    Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear

     

    Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. These are suitable for road and track use

    For S660 Spoon Monoblock Only

    S660 BRAKE PADS [FRONT] MONOBLOCK

    45022-MJW-000-A
    Excl. Tax: €229.17 Incl. Tax: €275.00

  • S660 BRAKE PADS [REAR]

    Product Overview

    Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear

     

    Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. These are suitable for road and track use

    S660 BRAKE PADS [REAR]

    43022-JW5-000-A
    Excl. Tax: €208.33 Incl. Tax: €250.00

  • S660 BRAKE ROTOR FOR MONOBLOCK

    Product Overview

    Because the S660 STD brake disc adopts solid discs, it is inevitable that the brake temperature will rise excessively in sports driving even though it is a mini car with a light weight.

    Therefore, we have newly developed a dedicated ventilated disk to fully demonstrate the performance of S660 FULL monocoque calipers.

    By adopting an ideal ventilator with a disk diameter of 260 Φ and a thickness of 17 mm, we succeeded in dramatically improving brake cooling efficiency in sports driving and sustaining a stable brake feel.

    Two rotors required

    S660 BRAKE ROTOR FOR MONOBLOCK

    45251-JW5-000-A
    Excl. Tax: €200.00 Incl. Tax: €240.00

Set Descending Direction

1-12 of 29

Page:
  1. 1
  2. 2
  3. 3

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Product Enquiry

<

Loading, please wait ... Loading, please wait ...